Paint Protection Coating – Ceramic Pro

  • CP-4
  • CP-3
  • CP-2
  • CP-1
  • CP-8
  • CP-7
  • CP-6

Ceramic Pro is not a paint protection, wax or sealant that will wash away or break down over time. It is a nano-ceramic coating that forms a Permanent Adhesion to the paint and can only be removed through abrasion.

Ceramic Pro can only be applied by Approved Applicators. It has been officially tested by “SGS” SGS is the world’s leading inspection, verification, testing and certification company.

Check out the following Info about Ceramic Pro 9H|Light|Sport|Strong|Rain|Leather|Rubber|Textile|

# |Carzwerk|Ceramic Pro|Paint Protection Coating|Glass Coating|Ceramic Coating|Bay Area|San Jose|Fremont|Paint Coating Specialist|

The shine from this product is not comparable to any other product on the
market. It has to be seen in real life.

When you talk about surfaces being hydrophobic you often talk about the water contact angle of the surface. The higher angle the less dirt or liquid will attach to the surface. A drive in the rain will make the car look newly washed. This hydrophobic effect will last a lifetime if maintained correctly.
The coating has high resistance against the damaging containments and harsh chemicals that a car can be exposed to. The car will stay protected.

Bare metal will oxidize and painted surfaces will not. Ceramic Pro´s protective coat protects the paint and the metal from getting in contact with water and oxygen.

The coat will not be effected under 1400 Fahrenheit.
Silkoxid which is used in sun block is also used in Ceramic Pro’s products. The UV protecting keeps the paint, rubber and plastic from aging.
Ceramic Pro has been officially tested and certified by “SGS”. SGS are the world’s largest and leading inspection, verification, testing and certification company trusted by millions.

Ceramic Pro is constantly tested to ensure it meets the highest standards.

OFFICIAL COATING TEST

Gloss Level – High (depends on substrate)
Viscosity #2 Zahn Cup – 12~14 seconds
5% Salt Spray (ASTM B117) – 350 hrs
Pencil Hardness (JIS 5400) – Above 9H
Adhesion Cross-Cut Tape (ASTM D3359) – 5b (no coating loss)
Mandrel Bend (ASTM D522) – 0 mm coating loss at 180° rotation
Impact (ASTM D2794) – 80/80 inch-lbs

Ceramic Pro 9H is a permanent nanoceramic protective paint coating. Its transparent 3D matrix structure protects the paint or surface from scratches, graffiti, dirt, aging, premature oxidation, weathering, road salt, rock chips, bugs, bird droppings and even acid rain. It offers excellent scratch, thermal (1382 degrees), UV, oxidation, corrosion and chemical resistance. A surface that has been sealed with Ceramic Pro 9H stays clean for a longer period of time due to its smoothness and hydrophobic qualities. Ceramic Pro 9H is permanent and can only be removed using machine polish. The unique formulation of 9H has enabled it to be multi-layered which means the thickness of the coating can be increased with additional layers allowing a thicker/harder film that will increase its scratch resistance.

The super hydrophobic and anti-graffiti effects of Ceramic Pro Light mean the coated surface will stay cleaner for longer as dirt and grime will not stick to it. Ceramic Pro Light is highly durable and leaves a high gloss surface once applied.

Super Hydrophobic Effect
Weather & UV Resistance
High Gloss Finish
Anti-Graffiti
Advanced Chemical Resistance
Oxidation & Corrosion Resistant

Ceramic Pro Sport
”SPORT” – Maintenance Coating was designed for Ceramic PRO 9H maintenance which is an easy to install solution. You can use ”SPORT” to maintain Ceramic PRO 9H to keep the super hydrophobic effect and also avoid the water spots. What you need to do is to preload ”SPORT” into the microfiber cloth and then wipe on the surface at the same time when you dry the surface after washing.

Ceramic Pro Strong is the product used in more rough environments. It is utilized as one component coating and should be applied in one layer. Once sprayed on a surface it is comparable to 40 coats of 9H. Strong is used on boat hulls, pipes, facades, rims, oil-rigs and many other industrial surfaces and materials. It protects the surface from any harsh chemicals, dirt, UV and growth leaving surfaces with less friction. The product is resistant to graffiti, solvents, acids, bases, and chemicals.
Ceramic Pro Rain protects windows from dirt and water. This is mainly used for windshields on cars and visors on helmets. What differentiates Ceramic Pro Rain from similar products is the durability and the hydrophobic characteristics. Note! This is not rainex. Once applied the effects of this products last up to a year.

Superhydrophobic effect -110 degrees.
Excellent wear resistance.
Keeps glass cleaner.
Allows water to roll off glass.

Ceramic Pro Textile
Ceramic Pro Textile reduces the surface energy of textile or suede. When liquids come into contact with the fabric, it forms beads and simply roll off whilst keeping the textile substrate dry.

Ceramic Pro Plastic and Rubber
Ceramic Pro Plastic and Rubber is suitable for both interior and exterior. Coated surfaces with Ceramic Pro Plastic and Rubber will give a hydrophobic effect with wear resistance. The product works for both new and old products.

Ceramic Pro Leather
Ceramic Pro Leather has a super hydrophobic effect. Liquids spilled bead up on surface and can easily be wiped away. The UV protection prevents the leather to age. It makes old leather look new.

Ceramic Pro Packages

Basic

Best value

  • 1 layer CP light on paint
  • Basic Paint Prep Only, Paint Correction Extra
Contact us!

Gold

Best Choice

  • 4 Layers CP 9H + 1 Layer CP Light
  • Stage 1 Paint Correction Included
Contact us!

For any questions regarding our pricing plans above, don’t hesitate to contact us!

#|Resistance|UV Protection|Gloss|Shine|Hydrohobic|SGS|Oxidation|Bugs|Bird Dropping|Acid Rain|Layer|9H|